Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

9.9Ghz patch antenna with CST

Status
Not open for further replies.
G

guytoub

Full Member level 2
Joined
Dec 23, 2004
Messages
123
Helped
4
Reputation
8
Reaction score
5
Trophy points
1,298
Activity points
923
Hello guys,

I tried to design a 8*8 patch antenna array at 9.9 Ghz with CST and first i designed a single element.
i use the RO5880 Substrate with Er=2.2 and H=0.508 mm

i would like to know if my subtrate is the best to work at this frequency and to design this kind of antenna?
why when I simulate my ptach I narrive not get my point of resonance frequency on the axis of the real smith chart ?

Thanks for your help

Regards
 

RO5880 is reasonably good substrate. The best substrate is air - no dielectric losses.
Your 2d question is unclear. Simulation and measurement do not match? - could be many different reasons, more details needed to answer. First study many other posts on this board discussing the same problem.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top