Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

[SOLVED] How to use PSS of Cadence Spectre ?

Status
Not open for further replies.
A

arminakkk

Newbie level 4
Joined
Aug 18, 2010
Messages
6
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,283
Location
Netherlands
Activity points
1,341
pss convergence

Hi
I'm designing a frequency divider by 1.5 and I need to find the noise floor of this divider. It seems to be working fine in time domain, but pss does not converge. I'm using ideal input sources (freq=4GHz) and using Spectre Simulator in Cadence. This is my first time simulating such things in Cadence... can anyone help me?!

ps. pss and pnoise simulation is the only thing I can think of in order to find my divider's noise floor, is there any other way to do it?
 

Re: pss convergence

it maybe need set a correct beat frequency for simulation, such as fclock/1.5
 

Re: pss convergence

rambus_ddr said:
it maybe need set a correct beat frequency for simulation, such as fclock/1.5
Click to expand...
Wrong.

Don't use a term of "beat", if you mean PSS of Cadence Spectre.

See "spectre -h pss", if you mean PSS of Cadence Spectre.
There is no "beat" in analysis statement for PSS of Cadence Spectre.
"beat frequency" of PSS setting UI is not beat frequency. It is a "fundamental frequency" not beat frequency.

arminakkk said:
I'm designing a frequency divider by 1.5 and I need to find the noise floor of this divider.
I'm using ideal input sources (freq=4GHz) and using Spectre Simulator in Cadence.
Click to expand...
Set fundamental frequency of PSS as fin/3, here fin=4GHz.

See https://www.designers-guide.org/Forum/YaBB.pl?num=1268969030/7#7
 
  • Like
Reactions: restart and yxh12321

    V

    Points: 2
    Helpful Answer Positive Rating
    Y

    yxh12321

    Points: 2
    Helpful Answer Positive Rating
    R

    restart

    Points: 2
    Helpful Answer Positive Rating
if it does not converge even after using proper fund.freq and tstab period,you can use initial conditions from the transient settled op as ic for pss...
also you can play with steadyratio and tolerances to make pss converge..once pss converges make you sure you got the correct outputs from your circuit...

rampat
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top