Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
Re: whch to start with pic or arduino
I personally started off with microcontrollers only last year. And I consider myself fortunate that some one suggested Arduino to me....
Well Arduino is very good for beginners since, you need not know a lot to start off and the support available on forums...
Hi guys,
I am sorry to bump such an old thread, but it is just that my answer and logic is different form the ones posted above.
Here is goes...
Well my approach gives me a required FIFO depth of 17....
Because, at the 17th clock period, the first input data (which by now has moved to the 17th...
could you please rephrase your question?
I don't understand your question..
in one bit case:output will be either 0 or 1.... NOT 00, 01, 11
in two bit case: it will be 00,01,10,11
It is R/2 AFAIK.
Lets suppose its a one bit ADC... you now need two take off points from the resistor ladder.
Recall that the top of the resistor ladder is connected to Vcc and bottom to Gnd.
So for two take off points, you effectively need three resistors, say A, B and C so that you get two...
thanks guys for the help
@zorro - can you suggest any textbook where I can read further on the pole-zero concept with respect to energy storing elements in circuits?
I am not sure if this applies to your case especially since your circuit already has an opamp, but one time faced this signal distortion problem was when I was trying to read some microAmpere current directly with a probe... adding an opamp buffer solved my problem (its simply a negative...
sorry guys, i typed the circuit correctly, but the white-spaces I inserted were ignored and the circuit was displayed incorrectly (which I failed to notice, sorry again)
this is what I meant:
the outputs are same as those of the multimeter take off points...
@sutapanaki - yes you have a...
Hi friends,
I have been preparing for competitive exams and came across a question on multiple RC circuit time constant derivation...
one particular problem was of the form:
----------R1||C1----------- <------------Vout+
|...
Re: mitutoyo spc pinout
sorry for bumping an old thread, but how did the interfacing turn out guys?
i am trying to do the same, with a mitutoyo digimatic indicator.
Hi guys, I live in India and I was given a Duracell NiMH Battery + recharger pack from the US as a gift. I later realized its adapter only worked on 120V input.
I had almost forgotten about it, when today I happened to come across a 240V input to 120V output adapter during a visit to the local...
Thanks for the replies david and keith. That seems to have worked. Created my first set of gerber files! :D
But I have a new doubt now...its related to drill holes.
Well, basically I am just starting out and my first board is an evaluation board for 0.5"x0.5" size VCOs from Crystek Corp.
I...
Hi guys,
i have spent about 4-5 days viewing Eagle tutorials by Warren Young (Tangentsoft) and Jason (rpcelectronics). Well it helped me build my own parts (will upload it here soon) and also i seem to be done with the schematic.
But in the step in which you make the board is where i am getting...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.
