I am working with a project having around 70 DDR LVDS 910 Mbps connections to FPGA. I am wondering if ZYNQ 7Z030 have enough LVDS IOs with at least 910 Mbps ?
Another question, as there are two Ethernet Controllers in ZYNQ 7Z030, does this means that no Ethernet controller chip is required on the PCB and only Ethernet PHY port is needed which has to be directly connected to ZYNQ 7Z030 ?
You want to read ds191-XC7Z030-XC7Z045-data-sheet and ug865-Zynq-7000-Pkg-Pinout to answer the question. The larger (676 pin) package has sufficient differential pin pairs, smaller (484 pins) only scarcely.
Yes, only external PHY needed, special ethernet standards might work without PHY.