Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Xnet routing problem in Allegro

Status
Not open for further replies.

m.prashanthpsg

Newbie level 1
Newbie level 1
Joined
May 16, 2009
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,289
Hi,
I created XNET by assigning value DISCRETE and created a model for resistor pack with 8 pins. A net are arranged like

BGAPIN(DM355) ---> net(DDR_CKP) -- |RES| -- net(DDR_CCKP) --> BGAPIN (DDR2)

After assigning model to resistor pack, The Xnet was created in the name DDR_CCKP. When I try to route, using route nets_by_pic it is routing only the DDR_CCKP net and DDR_CKP net is not getting routed. I am using Allegro PCB design XL 16.0. Can the Xnet name be same as one of the net names? Can anyone suggest what i am doing wrong here?

Thank you.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top