Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

WLAN specification...

Status
Not open for further replies.

vkekk

Full Member level 3
Joined
Mar 30, 2007
Messages
159
Helped
5
Reputation
10
Reaction score
4
Trophy points
1,298
Activity points
2,211
I need WLAN -802.11 specification for rayleigh frequency selective fading channel..

Signal bandwidth---
channel bandwidth---
carrier frequency --- 2.4 ghz
sampling frequency(fs) ---
doppler frequency ---

pls tell me above details for simulation of rayleigh frequency selective fading channel.. need urgently...
 

get the standard for free at the IEEE site
 

i don't have access, can u pls help me the same above...
 

hi,

I hope these might be correct ,cross check once...

Signal bandwidth/Subcarrier Spacing -312kHz
channel bandwidth---20MHz
carrier frequency --- 2.4 ghz
sampling frequency(fs) ---20Msps
doppler frequency --- Its depends on Velocity( with in 10kmph)=v/lambda

V is velocity in m/sec
lambda=c/2.4G ;c-velocity of light
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top