Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Wireless ROBOT control system

Status
Not open for further replies.

Yeeching

Newbie level 6
Joined
Jul 26, 2008
Messages
12
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,283
Location
Taipei Taiwan
Activity points
1,411
wireless robot

Are anyone have a willing to join this wireless ROBOT control?
Use 8051 CPU, IR sensor, Ultra sonic sensor, GPS, Compass, Acelerometer, Laser ranger, RF-Link modem, GPRS etc.. to control the Robot?
 

m_pourfathi

Full Member level 4
Joined
Feb 7, 2008
Messages
201
Helped
17
Reputation
34
Reaction score
3
Trophy points
1,298
Activity points
2,592
wireless robot controlled by pc

How do you join? what are the conditions?
 

khamitkar.ravikant

Member level 4
Joined
Jul 15, 2008
Messages
78
Helped
6
Reputation
12
Reaction score
2
Trophy points
1,288
Location
India
Activity points
1,798
wireless robot control

i will be happy to join this to utilize my some embedded and VLSI knowledge and execute it .
and it will be better if u will tell location bounds and rights and limits to each participantss.
thanks.
i will be thankful to u r so kind reply.
 

Yeeching

Newbie level 6
Joined
Jul 26, 2008
Messages
12
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,283
Location
Taipei Taiwan
Activity points
1,411
wireless robot controller

Dear All,
For this wireless Robot control system, I hope use high level computer language like as C, C++, VB..etc. to control full system, the system will seperate into serveral parts, like as 1. circuit hardware, 2. control software, 3. monitor software,
circuit hardware included main CPU , Sensor, Motor driver, wireless and mechanical architecture,
I could offer a hardware architecture connect with ethernet and anybody may use your own software to control it via TCP/IP or wireless through TCP/IP to RF-Link (RS-232C).

Added after 8 minutes:

This application just for study and research,
no limit and condition if you just like to study it.
First, need to know 8051 CPU hardware or C language, And could run on Keil C IDE envinentment if you have a 8051 hardware and software.

Added after 2 minutes:

If you using VLSI like as CPLD or FPGA chip then you need to know Verilog or VHDL language,
Then you may design a hardware / software to control it .

Added after 3 minutes:

If you do not know hardware nor software,
one is study it right now or just look people do it.
have a fun or have a joke.

Added after 5 minutes:

To know 8051 CPU, first you need to get a set of
8051 CPU, You may get a free samples from CPU manufactures like as Silicon Lab. Inc.
[ https://www.silabs.com/pages/default.aspx ].
Also may download the IDE debug tools too.
You also need to know C language, find a book or
website which discussion about C language.

Added after 3 minutes:

After that you have prepare the hardware or software capability then we may discussion which
part of system you are interesting.

Added after 2 minutes:

For host equipment like as PC/AT system, You need to know C/C++ language, TCP/IP, RS-232C port., GUI....
 

khamitkar.ravikant

Member level 4
Joined
Jul 15, 2008
Messages
78
Helped
6
Reputation
12
Reaction score
2
Trophy points
1,288
Location
India
Activity points
1,798
wireless control of robotic system

as i m quite familier to FPGA programing using Xilinx ISE so i can write VHDL program for some of the maodules so i can involve in this project.
 

m_pourfathi

Full Member level 4
Joined
Feb 7, 2008
Messages
201
Helped
17
Reputation
34
Reaction score
3
Trophy points
1,298
Activity points
2,592
wireless-robot

I have used ISE to develop VHDL programs and also I know c\c++ using microcontrollers like AVR. But I've never done any robotics project. I am in communications field. Is there anything I can do?
 

jigisha

Full Member level 2
Joined
Mar 4, 2008
Messages
147
Helped
14
Reputation
28
Reaction score
4
Trophy points
1,298
Activity points
2,116
wireless robotic control

yes i m ready for the programming of 8051.....if i can do any thing for u.then its my pleasure.bocz i m interested in 8051 programming
give the idea about that...plz...
 

umery2k75

Advanced Member level 1
Joined
Apr 19, 2006
Messages
425
Helped
41
Reputation
80
Reaction score
15
Trophy points
1,298
Location
Pakistan
Activity points
5,631
computer controlled wireless robot

Yes Please, I want to get involved in it too. I have some skills in embedded desigining and I can program 8051 family of controller very well in assembly and in C using Keil C51, I can attach sensors, equipments and peripherials with it and could do a lot more.
 

randell_xtian

Full Member level 4
Joined
Mar 25, 2008
Messages
203
Helped
28
Reputation
56
Reaction score
15
Trophy points
1,298
Location
Philippines
Activity points
2,667
wireless robot circuit

Hi,

where, when and how to join?? please PM me for further information about the organization...

best regards,
randell_xtian :D:D:D
 

Yeeching

Newbie level 6
Joined
Jul 26, 2008
Messages
12
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,283
Location
Taipei Taiwan
Activity points
1,411
circuit for wireless robot

Dear All,
Thank you for lots of friends interesting this project.
For VHDL , You may study Encoder and PWM knowledge,
Like as HCT2020 encoder IC, You may use VHDL to program it,
Study it first then we will discussion each part of project.

Added after 7 minutes:

Design Robot system with 8051 CPU just use for small Robot application, Use Embedded System with Real Time OS (like as QNX, Windows XP Embedded) for big one of Robot application, We may start from small one then big one in the near future.
 

spikeyang

Member level 5
Joined
Mar 3, 2005
Messages
91
Helped
6
Reputation
12
Reaction score
1
Trophy points
1,288
Location
Shanghai China
Activity points
1,822
embedded systems with wireless robotics

I like to see what it's going on. I know somthing about wireless.
 

Yeeching

Newbie level 6
Joined
Jul 26, 2008
Messages
12
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,283
Location
Taipei Taiwan
Activity points
1,411
robot controlling system

For wireless Robot control, We may choice short range of wireless controller,
like as 100M ~ 300M distance, 10mW controller, 2.4GHz ISM band, The wireless conroller should have code encryption/decryption function. It needs to consider the bandwidth if wireless signal transfer with image / video.
For small control area the ISM band is a good selection, However, If stay in the public area, Most of user used ISM band then it will be cause control frequency coflict each other, This is an importent condition for Robot control.
 

umery2k75

Advanced Member level 1
Joined
Apr 19, 2006
Messages
425
Helped
41
Reputation
80
Reaction score
15
Trophy points
1,298
Location
Pakistan
Activity points
5,631
embedded systems in wireless robots

Is the work started, how are you going to communicate to us. It seemed to me, as if no work is going on and it was merely an emotional choice of combined effort at that time, now everybody is cooled down.I hope I am wrong.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top