dz99
Member level 5
- Joined
- Feb 13, 2006
- Messages
- 89
- Helped
- 5
- Reputation
- 12
- Reaction score
- 1
- Trophy points
- 1,288
- Location
- Between East and West Europe
- Activity points
- 1,929
Hi All,
Have you ever seen an example of this strange operation mode of a wifi device?
The conventional operation is:
1. association of the AP and the client
2. duplex communication (transmit & receive)
However what is interesting for my application is a kind of "broadcasting" mode, using commercial wifi devices, where only the transmitter device hardware modification is allowed, the receivers are commercial units, only customer software / firmware allowed.
I suspect I have to dig down into the packet structure for this... Any idea? The required transmission speed is quite low, about 0.1...0.5 Mbps.
Thanks,
Have you ever seen an example of this strange operation mode of a wifi device?
The conventional operation is:
1. association of the AP and the client
2. duplex communication (transmit & receive)
However what is interesting for my application is a kind of "broadcasting" mode, using commercial wifi devices, where only the transmitter device hardware modification is allowed, the receivers are commercial units, only customer software / firmware allowed.
I suspect I have to dig down into the packet structure for this... Any idea? The required transmission speed is quite low, about 0.1...0.5 Mbps.
Thanks,
