Which should i select for program STM32F103RET6 in Keil(+a request for blink progra)?

[rozeh]

Hi everybody
i have a STM32F103RET6 and now i want to check it:wink:. well, when i going to select the MCU, i confused:-(. i don't know Which should i select?



when i see in datasheet, i don't find the size of my MCU:-(.



and my request:
who has a LED-blink program for check my MCU. please put here.

 

[TommiRouvali]

Look at Part numbering section.(page 123) You have R=64pins, E=512Kb flash, T=LQFP.

 

[rozeh]

Thank you Tommi,
and for LED-Blink, i found this example for it to this address:
Keil>ARM>Examples>Blinky

code:

#include <stm32f10x.h>                       /* STM32F103 definitions         */

/*----------------------------------------------------------------------------
  wait function
 *----------------------------------------------------------------------------*/
void wait (void)  {
  int  d;

  for (d = 0; d < 2000000; d++);             /* only to delay for LED flashes */
}


/*----------------------------------------------------------------------------
  Main Program
 *----------------------------------------------------------------------------*/
int main (void) {
  unsigned int i;                            /* LED variable                  */

  RCC->APB2ENR |= (1UL << 3);                /* Enable GPIOB clock            */

  GPIOB->CRH    =  0x33333333;               /* PB.8..16 defined as Outputs   */

  while (1)  {                               /* Loop forever                  */
    for (i = 1<<8; i < 1<<15; i <<= 1) {     /* Blink LED 0,1,2,3,4,5,6       */
      GPIOB->BSRR = i;                       /* Turn LED on                   */
      wait ();                               /* call wait function            */
      GPIOB->BRR = i;                        /* Turn LED off                  */
    }
    for (i = 1<<15; i > 1<<8; i >>=1 ) {     /* Blink LED 7,6,5,4,3,2,1       */
      GPIOB->BSRR = i;                       /* Turn LED on                   */
      wait ();                               /* call wait function            */
      GPIOB->BRR = i;                        /* Turn LED off                  */
    }
  }
}

how does this code work?