Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Which capacitance to put with microcontroller timing crystals?

Status
Not open for further replies.
T

treez

Guest
Hello, we are using an SAM3N00B microcontroller and have a 32.768KHz crystal connected to it, as well as a 4MHz crystal connected to it, (on the other crystal connection pins)

Do you know which capacitance value goes with these crystals?...Also do you know if we need series resistors or not?

32.768KHZ crystal datasheet: (ABS25-32.768KHz) = Farnell 1611824
http://www.abracon.com/Resonators/abs25.pdf

4MHz crystal datasheet: (ABLS-4.000MHz-B2-T) = Farnell 1652553
**broken link removed**


Here is the microcontroller datasheet: (SAM3N00B)
http://www.atmel.com/Images/doc11011.pdf
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top