Welcome to our site! EDAboard.com is an international Electronic Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
I have developed some time ago a DSP based meter. This meter device operates in mono and trifasic systems. I have used the TMS320F240 digital signal processor from Texas Instruments. The meter give, in real time, the following electrical parameter: RMS value from current and voltage; active and reactive power; active and reactive energy (consumed or produced) and power factor.
The software was based in specific algorithm's. If you like I send by mail some references that will help you with your project.
There are other solutions like fixed function devices, for exempla: by Analog Devices, Amtel, Cirrus Logic, etc...
But, I think that a software based devices will provide much more functionality and evolution ...
Make a search at this discussion board you will find some useful information :smile
hi, I want to give power factor as input to the microcontroller AT89S52 or I can use any other microcontroller. How can I give this power factor as input. The power factor is varying continuously(normal AC signal). Anyone helping in this hand will be appreciated.