Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronic Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

when do we need equalizer?

Status
Not open for further replies.

pmonon

Full Member level 3
Joined
Jan 28, 2006
Messages
155
Helped
7
Reputation
14
Reaction score
1
Trophy points
1,298
Activity points
2,243
site:edaboard.com equalizer

when do we need equalizer?
 

Naveed Alam

Full Member level 5
Joined
Jan 6, 2006
Messages
287
Helped
16
Reputation
34
Reaction score
3
Trophy points
1,298
Activity points
3,250
Used at receiver side to accomodate phase/frequency shifts..


Naveed
 

A.Anand Srinivasan

Advanced Member level 5
Joined
Oct 15, 2005
Messages
1,804
Helped
257
Reputation
514
Reaction score
39
Trophy points
1,328
Location
India
Activity points
10,680
we need a equalizer when the gain over our region of operation is not constant or phase over our region of operation is nonlinear.... so for the correction of the transfer to our required one we use equalizer....
 

m_llaa

Full Member level 4
Joined
Mar 12, 2006
Messages
231
Helped
44
Reputation
88
Reaction score
21
Trophy points
1,298
Location
My Love Iran
Activity points
2,558
Hi
When the frequency response of the channel is not constant. Then dispessive copy of your transmitted signals is received in receiver.
 

mimomod

Member level 4
Joined
Jan 25, 2006
Messages
77
Helped
22
Reputation
44
Reaction score
7
Trophy points
1,288
Activity points
2,351
In wireless communication, you use an equalizer if you transmit signal in frequency selective fading channel.

The equalizer is used to compensate the attenuation or amplification due to the frequency selective fading channel.

Without equalizer, most likely you will get useless symbols since a transmit symbol experiences interference due to other symbols.

best
 

Harshash

Junior Member level 2
Joined
Nov 8, 2006
Messages
24
Helped
2
Reputation
4
Reaction score
1
Trophy points
1,283
Activity points
1,387
To Compenstae for attenuation, phase and freq. of a signal undergone frequency selective fading..
u do this at the receiver before demodulation
 

Status
Not open for further replies.
Toggle Sidebar

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top