Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

What should be the Kp and Kn in this TSMC 0.35um?

Status
Not open for further replies.

wael_wael

Full Member level 4
Full Member level 4
Joined
Dec 3, 2005
Messages
221
Helped
5
Reputation
10
Reaction score
2
Trophy points
1,298
Activity points
2,760
tsmc 0.35um design kit

hi
i have mosis parmetric Test for 0.35um process
**broken link removed**

could some one told me how much
Kp, Kn ??
i knew the result, but i need to be sure
thanx in advanced
 

Re: TSMC 0.35um

u can find it easily, only by measuring the current and gate-source voltage of a FET.
but I think that kn=3*kp=60 uA/v2.
sorry I dont have 0.35 um now.
 

    wael_wael

    Points: 2
    Helpful Answer Positive Rating
Re: TSMC 0.35um

hi
the link of 0.35um process is included in the message, could you try again to tell me what is the kp & kn frome the link
regds
 

TSMC 0.35um

do a Vds sweep of the transsitor by fixing the vgs. And then measure the current. Now you know all then factors in the current equation , so you can easily find beta..But i feel the transistor gains in these processes available in the NCSU design kit are not high enough.


amarnath
 

Re: TSMC 0.35um

thanks, but why you dont accept that value in the process 0.35u paper,

k'= u0 cox/2 ,why you use B way
thanx
 

Re: TSMC 0.35um

u run the hspice with .op command .
and it will show u all paramtere like kp and kn u cox ..
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top