Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
The Post Processing / Processor is a concept which deals with manipulating and inspecting results of a full wave simulation.
For example, if you have an S-Parameter result plot and you want to get the -3dB or -10dB points out of it you may "Post Process" this plot.
Another exmaple, if you have 3D E-field plot and you want to see a cut 2D plane in a given direction, for example - you may "Post Process" this.
The CST MWS Studio has ready Post Process Macros for various usages which makes the Post Processing an automatic procedure.
Also, you can program Macros by yourself to get what you want from the results.
Hi all
and I should say that Post processing is the second part of the simulation that it takes less time than full wave and it gives the complete set of results especially for pattern
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.