What is the advantage/disadvantage of putting ferrite bead on Input power supply Gnd

Status
Not open for further replies.

sivamani

Full Member level 6
Joined
Jan 30, 2007
Messages
336
Helped
46
Reputation
92
Reaction score
43
Trophy points
1,318
Location
Hyderabad
Activity points
2,919
What is the advantage/disadvantage of putting ferrite bead on Input power supply Gnd and board gnd ?
 

Advantage: it will suppress the high frequency noise in the path of signal.It can be seen with cables as shown below....


- - - Updated - - -

Also when you are making common ground for analog and digital, ferrite bead is used to reduce noise....
 

Attachments

  • Cable_end.JPG
    1 MB · Views: 52
Last edited:

What is the advantage/disadvantage of putting ferrite bead on Input power supply Gnd and board gnd ?
Hi Sivamani
Ferrite beads and low value inductors which are in series with the main line usually are being used to suppress high frequency waves through the line . ( it can be considered as a poor EMI filter too )
Best Wishes
Goldsmith
 

I have heard somewhere that they are poor at withstanding thermal shocks (changes in temperature).
 

Status
Not open for further replies.

Similar threads

Cookies are required to use this site. You must accept them to continue using the site. Learn more…