Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

what is skew number?

Status
Not open for further replies.
HI

...> skew is calculated between the two flops.these are two types
1.positive skew
2.negative skew
... > after CTS (clock tree synthesis) is done.then only you come up with skew number..
Clock.report
 
Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top