What are the steps for using Alegro?

Status
Not open for further replies.
A

Aymansh

Newbie level 5
Joined
Jun 27, 2005
Messages
9
Helped
1
Reputation
2
Reaction score
0
Trophy points
1,281
Activity points
1,342
Can i have any doc. discrbe the complete cycle for using Alegro

1-Alegro PCB Librarian
2-importing the netlist to alegro
3-using Alegro in routing the board.
4-constrain manager
5-how can i import DXF file to Alegro
 

Re: Alegro Support

Allegro is not an intuitive software to learn but is not difficult either. It was written originally for *ix OS. If you know another layout tool by reading help in Allegro you can get started.

For importing DXF go to file import DXF select your DXF file preferably in Allegro folder. If you have already defined your layers select Incremental addition, failing to do so results in lost of all your layers. Also you need to know which unit your DXF was created select it accordingly. Now you need to create conversion file click on tab to browse and type a name for your file click open. Then go to Edit/View layers here you have to map DXF layers to Allegro after mapping the layers click ok then import.

Good Luck,

Majnoon
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…