Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Welding unitl DALEX GI 130 with PCB WIG 18 RK

Status
Not open for further replies.
A

alpibucky

Member level 1
Joined
Jan 30, 2010
Messages
34
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Location
Belgium
Activity points
1,458
Welding unit DALEX GI 130 with PCB WIG 18 RK

Hello,

I'm searching for the service manual and.or the schematic of this old welding unit.

With kind regards

Alpibucky
 
Last edited:

Re: Welding unit DALEX GI 130 with PCB WIG 18 RK

Hello,

The one I have got was out of service : no voltage at the output. After check I found that a resistor (10 ohm 17 W) on the PCB was out. I replace it and now the voltage is 48 V.
I still need the user and service manual.

With kind regards

Alpibucky
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top