Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

want an ARM board based on AT91SAM9G45

Status
Not open for further replies.
Brittany Snow

Brittany Snow

Member level 3
Joined
Aug 30, 2011
Messages
58
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,306
Activity points
1,672
I am searching a board based on AT91SAM9G45 processor.

1. It must be all industry designed. Working temperature is -40-70 Celsius, not 0-70 Celsius.

2.Have 16 GPIOs, 5 USARTs, RS485, CAN, 2 methods of power which is +12V, ADC and other interface.

3.Supports 10.4"LCD, 4.3"LCD and 7" LCD.

4.Power consumption is below 2W when is without LCD.

5. Have a wide range of particle application demos and codes.

6. It can be compatible with AT91SAM9M10.

Besides, the dimension of the board is not big.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top