Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronic Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

vibration rejection in IMU

Status
Not open for further replies.

senmeis

Advanced Member level 4
Joined
Nov 26, 2014
Messages
102
Helped
0
Reputation
0
Reaction score
0
Trophy points
16
Activity points
733
Hi,

One spec of an IMU is: ±450 deg/s wih high vibration rejection.

Question: Shall vibration have the unit “deg/s”?

Senmeis
 

hyprfrcx

Junior Member level 1
Joined
Feb 7, 2018
Messages
16
Helped
4
Reputation
8
Reaction score
4
Trophy points
3
Activity points
148
Though originally it is defined as acceleration (m/s2) or as velocity (m/s), It is fine to use the concept for other variables, such as the angle, as you indicated.
 

Status
Not open for further replies.
Toggle Sidebar

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top