Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Via fences, what are the most important parameters for design

Status
Not open for further replies.
B

broncoremy

Newbie level 1
Joined
Oct 27, 2010
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,288
What is more important for EMI shielding effectiveness with respect to guard traces and via fences, the width of the copper trace that circles around the area or the distance between the vias to ground that connects to the trace and the other ground planes? Are both equally important or is one important and the other not so much?

Any good web resources out there for this?
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top