nvidia vga tv out signal
This program allows you to use your TV as a monitor, given that you use the proper hardware to connect your VGA to the output equipment.
The driver is a TSR (Terminate and Stay Resident) which will try to make sure your VGA card is, at all times, properly programmed for TV timings, which are quite different from VGA standards:
VGA timings are normally 31.469KHz horizontal frequency, and 70.08Hz vertical frequency. Non-interlaced.
PAL and NTSC are interlaced. PAL (Phase Alternating Line) has a horizontal frequency of 15.625Khz and 50Hz vertical frequency. NTSC (National Television Standards Committee) has 15.750Khz and 60Hz respectively.
With PAL timings, only resolutions up to 800x600 can be fully viewed. With NTSC this figure goes down to 640x480, thanks to the lower resolution of this TV standard (525 horizontal lines, as opposed to PAL's 625). Note that these resolutions are available in ALL VGA cards.
regards
meax98