Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

unstable output of ADC0804

Status
Not open for further replies.

amrbem

Newbie level 5
Newbie level 5
Joined
Jun 28, 2006
Messages
8
Helped
3
Reputation
6
Reaction score
0
Trophy points
1,281
Activity points
1,326
hi all,

i'm a begginer
i tried to connect anADC0804 in the free running mode, but the out put is stable at a constant value or oscillating rapidly and it does no respond to the input.

i used the schematic in the datasheet .

please help me
 

use mazidi's book on 8051

check that you have a low capacity capacitor (1 nf) between VCC and GND
 

see this
**broken link removed**

it is due the wrong connection

Bibin John
www.bibinjohn.tk
 

May your power supply is not regulated.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top