unable to send commands to aubtm-20

Status
Not open for further replies.
G

gsairam

Newbie level 1
Joined
Apr 11, 2012
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,290
hi guys....im an arduino platform developer recently i bought an aubtm-20 module and it has got 2 ports one serial and other usb i connected it both that is i powered it up with the usb and connected it via serial to other port.....and i am having realterm and after setting the baud rate to 9600 and all other requirements i am connecting it to com5...in my case its com5....well after that i tried many commands but no response is seen on the output screen...could anyone help me out....here are the images of my aubtm-20
 


Me too having the same prob as U., i teried working with x-ctu for terminal for serial., first command alone working fine for me., first command is "LLL" it gives ok for that and not any of the rest commands.., do give a try for X-ctu and rep me dude
 

hi guys....im an arduino platform developer recently i bought an aubtm-20 module and it has got 2 ports one serial and other usb i connected it both that is i powered it up with the usb and connected it via serial to other port.....and i am having realterm and after setting the baud rate to 9600 and all other requirements i am connecting it to com5...in my case its com5....well after that i tried many commands but no response is seen on the output screen.
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…