UHF Amplifier design [hlp]

Status
Not open for further replies.
N

No one

Full Member level 5
Joined
May 11, 2005
Messages
287
Helped
4
Reputation
8
Reaction score
2
Trophy points
1,298
Activity points
3,425
Hello Everyone;
I want to use an amplifier in the UHF band (around 700MHz) with about 100MHz bandwidth. It should be with low IM3 distortions. I have used GALI-51 from minicircuits, but it seems to have IM3 distortions. Is there any aternative for GALI-51 gain block? If I want to design a transistor amplifier, what is the best transistor? What is the best design approach? Which book may help me?
 

is it a PA , or just a gain block for small signal

and what is the max output power and what is the gain

khouly
 

    N

    No one

    Points: 2
    Helpful Answer Positive Rating
Hello;
Khouly wrote:
is it a PA , or just a gain block for small signal

and what is the max output power and what is the gain
Click to expand...
It's a gain block for small signal (not PA) and max output power is about 5-10 dBm.
 

check the GaAs fet on avagotech web site , and also some BJT they have u will find a very good transistors there

khouly
 

    N

    No one

    Points: 2
    Helpful Answer Positive Rating
Dear No One,
Nothing is free from IP3, but you have not specified your IP3 requirements.
While GALI-51's IP3 is about 35dBm, you might want to check WJ's
AH215 (IP3 46dBm) or AH312 (IP3 49dBm).
These consume a lot of power.
S. H.
 

    N

    No one

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…