Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

TTL to RS485 converter

Status
Not open for further replies.

ajitnayak

Junior Member level 2
Junior Member level 2
Joined
Feb 22, 2013
Messages
21
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Visit site
Activity points
1,447
Dear all,

Can some one share me the circuit diagram for connecting ttl to RS 485 and RS232 using max 485 and max 232 IC
 

For the MAX232 look in the data sheet, it shows examples.

The MAX 485 also has examples in the data sheet but note that it also needs direction control signals so if you are plannng on using it as a serial extender, bear in mind some extra circuits may be needed. If you simply want to run a very long and fast serial link, look at using MAX488 or MAX489 instead. They need an extra pair of wires for bidirectional data.

Brian.
 

CAN YOU SHARE ME THE LINK FOR GETTING THE SCHEMATIC FOR ABOVE.

I HAVE GPS SENSOR WHICH GIVES TTL OUT PUT . I WANNA CONVERT USING MAX485 ic
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top