TSMC CL018/CR018 (CM018) Process

ads design kit

Hi All,

Does any body know where i can get T*MC 0.18um design kit for A*ilent ADS. I used it a year ago and it makes life a lot easier. Unfortunately i dont have a copy of it.

Thanks a lot......

ads designkit

I should be getting a copy soon. I can send it to you when I get it. It might be too large to email, so I will need a means of sending to you (ftp?).

Ron

simulation terminated due to error ads

Hi Ron,

Thanks a lot. I can run ftp server on my pc. So PM me when you get the kit. I can start the server and PM you the ftp details.

Once again Thanks a million.....

ads design kit

I also need it. Could you please send me a copy when you get it?

Regards,

lcg

resistors ads model

Ok lcg, i will post the ftp details here so that you can also download it.

simulation terminated due to error

I need it too, could you also pm me when it's available

site:edaboard.com design kit ads

Here is the TSMC 0.18u RF library for ADS. Very small, so I will post.

Ron

ads design kit

Thanks a lot Ron. I really appreciate your help.

mw6s004nt1 ads designkit

hallo

can we also have the documents of this design kit

thanx

binmodel

thanks a lot!

sun2002


No useless posts in the Elektroda.
Warning!

--
makswell

ads design kit example

Help, I installed the design kit under ads(windows) , copy 018rf.net mm018.net resistor.net to the Circuit\MasterModels folder of the design kit, excute errata_dos.bat and prefix_dos.bat , but when I simulate circuit ADS reports error as following:

Is my .net library version incorrect, or I have done wrong operation?
Could anybody help me?

Thanks in advance!


////////////////////////////////////////////////////////////////////////////////
Simulation / Synthesis Messages


Error detected by HPEESOFSIM during netlist parsing.
While evaluating expression `nch_rf.Tox':
expression has not been defined.
Error detected by HPEESOFSIM during netlist parsing.
Unresolved references:
nmos_toxfac
nmos_dlfac
nmos_dwfac
nmos_vthfac
nmos_k1fac
nmos_rdswfac
nmos_uefffac
nmos_cgdfac
pmos_toxfac
pmos_dlfac
pmos_dwfac
pmos_vthfac
pmos_k1fac
pmos_rdswfac
pmos_uefffac
pmos_cgdfac
ndio_cjfac
pdio_cjfac


Status / Summary

--------------------
Simulation terminated due to error.
--------------------

---------------------------------------
---- Creating New Display Window ----
---- Please Wait... ----

---- Window Created ----
---------------------------------------

Re: ADS designkit

look in this link , the kit is working

**broken link removed**

Re: ADS designkit

Any new version of tsmc ADS frontend?

Re: ADS designkit

In this ADS Design Kit, there is a file: mm018_dk.net. In this file

There are 12 different models for the same device:

model TSMC_CM018RF_BB_MODEL_nch BinModel
Model[1] ="TSMC_CM018RF_BB_MODEL_nchx1"
Model[2]="TSMC_CM018RF_BB_MODEL_nchx2"
Model[3]="TSMC_CM018RF_BB_MODEL_nchx3"
Model[4]="TSMC_CM018RF_BB_MODEL_nchx4"
Model[5]="TSMC_CM018RF_BB_MODEL_nchx5"
Model[6]="TSMC_CM018RF_BB_MODEL_nchx6"
Model[7]="TSMC_CM018RF_BB_MODEL_nchx7"
........................
Model[12]="TSMC_CM018RF_BB_MODEL_nchx12"

I don't understand those nchx1, ... nchx12. When ADS does the simulation,
which model it choose?

Thanks.

ADS designkit

hi ! how can i choose the value of the resistor/capacitor/inductance in the cmos circuit ?and if i haven't the value in my library or designkit , how can i do? thanks very much!

Re: ADS designkit

isaacnewton said:

In this ADS Design Kit, there is a file: mm018_dk.net. In this file

There are 12 different models for the same device:

model TSMC_CM018RF_BB_MODEL_nch BinModel
Model[1] ="TSMC_CM018RF_BB_MODEL_nchx1"
Model[2]="TSMC_CM018RF_BB_MODEL_nchx2"
Model[3]="TSMC_CM018RF_BB_MODEL_nchx3"
Model[4]="TSMC_CM018RF_BB_MODEL_nchx4"
Model[5]="TSMC_CM018RF_BB_MODEL_nchx5"
Model[6]="TSMC_CM018RF_BB_MODEL_nchx6"
Model[7]="TSMC_CM018RF_BB_MODEL_nchx7"
........................
Model[12]="TSMC_CM018RF_BB_MODEL_nchx12"

I don't understand those nchx1, ... nchx12. When ADS does the simulation,
which model it choose?

Thanks.

Click to expand...

Different corners maybe? Just a guess. Did you choose any model just to see if it would run?

Re: ADS designkit

i need ADS Design kit for 0.13um 0.09um.

can any one upload it !