Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

trouble working through the schematics

Status
Not open for further replies.
L

LUNCHBOX9000

Newbie level 4
Joined
Aug 19, 2007
Messages
7
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,331
i have an idea about a couple different things. if a lifting electromagnet w/ power to lift 500 lbs was placed next to another said e-magnet both on they would generate a pushing force equivelent to 1000 lbs? 2nd isn't this somewhat how a monorail works?

thanks
 

When you are thinking about lifting power it is scalar. The true is that lifting force is not power, it is vector. If you provide appropriate vector matching for two such magnets, you probably get almost twice lifting force. Good luck with these calculations!

Best regards
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top