Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Triple-Band Antenna help

Status
Not open for further replies.

unicorn_yun

Junior Member level 1
Joined
Aug 9, 2006
Messages
19
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,395
Hi,
I am designing a triple-band antenna for both GSM900/1800 and Bluetooth, and I want to know which antenna is suitable for such antenna whose Gain is also required to be 2dBi plus. Now I choose one Folded PIFA, which works for GSM/DCS/Bluetooth Triple-Band Application.
The paper is here,


Thanks for your help.
 

balaguru thavamani

Full Member level 5
Joined
Nov 8, 2006
Messages
245
Helped
55
Reputation
110
Reaction score
22
Trophy points
1,298
Activity points
2,478
hi unicorn_yun,

I've tried to simulate but i couldnt get expected results as mentioned in paper.
Do u get good result?
Which simualtor r u using?
 

unicorn_yun

Junior Member level 1
Joined
Aug 9, 2006
Messages
19
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,395
I cannot get the results as the paper said either. I found that when I adjusted the position of v1 and v2, I could adjust the frequency of Bluetooth.

I use HFSS to simulate the antenna project.
 

Azulykit

Advanced Member level 4
Joined
Feb 18, 2007
Messages
1,121
Helped
219
Reputation
436
Reaction score
112
Trophy points
1,343
Location
All over the Map.
Activity points
8,407
A Vialdi has more than enough bandwidth and is easily able to produce more than 2 dBi.
 

balaguru thavamani

Full Member level 5
Joined
Nov 8, 2006
Messages
245
Helped
55
Reputation
110
Reaction score
22
Trophy points
1,298
Activity points
2,478
I've simulated with the help of ie3d.
I didnt get expected results,
attached here is the RL plot.

regards,
balaguru.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top