Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
If you are planning to work on igbt then also u have to use transformer for ac power supply isolation....
If you are trying then please also be in touch with me as is all about technology any thing is possible....
One method would be to use an inductor and MOSFET configured in boost mode to step up the voltage to +300v or thereabouts and then use an H-bridge converter to convert this back to AC.
However, I would not recommend this as you have high peak currents, you need to use high voltage MOSFET/IGBT meaning that they will have higher Rds(on) and thus higher losses.
Are you sure you mean transformerless or not without iron core bulky transformer? The best solution would be to use a ferrite transformer at 50kHz or thereabouts to boost the voltage and then use H-bridge converter.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.