Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

[SOLVED] Transformer Connection

Status
Not open for further replies.
K

kb jones

Newbie level 3
Joined
Oct 16, 2010
Messages
3
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,300
I would like to know how these types of transformers are connected. It only has 3 wires on it (no primary or secondary like conventional transformers) with the inscription under each wire 0v 220v 240v
I am feeding in 240v and require an output of 220v.
This is an Ac circuit.

Please explain in detail as I am not very experienced.
 

Sound like an 'auto transformer'. Connect your 240V between 0V and 240V. You will then get 220V between the 220V and 0V terminals.

Keith
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top