Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

touchstone in momentum ADS

Status
Not open for further replies.

hisa

Member level 4
Member level 4
Joined
Mar 13, 2006
Messages
68
Helped
2
Reputation
4
Reaction score
1
Trophy points
1,288
Activity points
1,692
is it possible to use a touchstone (SNP) file in ADS momentum?
 

Yes..
Look at "Data Items" in component palette..
 
  • Like
Reactions: hisa

    hisa

    Points: 2
    Helpful Answer Positive Rating
Data item is active just in the schematic environment but not in momentum.
 

I have a stripline circuit but in some stages have imported some components (S2P from HFSS) to the circuit. now I want to simulate it in full wave (momentum).
 

I have a stripline circuit but in some stages have imported some components (S2P from HFSS) to the circuit. now I want to simulate it in full wave (momentum).
Simulate your microstripline only in Momentum by putting proper ports ( input output etc..) then transfer your MS line into schematic window by creating component option then connect the other stuffs in this schematic testbench and simulate them all in a single environment.
 
  • Like
Reactions: hisa

    hisa

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top