Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

TOLL ROAD RFID applications - what type of antenna is used?

Status
Not open for further replies.
A

aadee

Newbie level 4
Newbie level 4
Joined
Jul 31, 2009
Messages
6
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,283
Location
pakistan
Activity points
1,323
Re: toll road RFID antenna

I want to know what type of antenna is used in TOLL ROAD RFID applications working in this frequency range: 2350-2450MHz...

also if anyone can provide me with the specifications of this prticular antenna,like length and width of the patch, length ,width and thickness of substrate and dielectric constant value...

Also I may need a simulated antenna file on HFSS..

thanx

Added after 6 minutes:

kindly reply with ur suggestions..I need them really badly...thanks
 

Re: toll road RFID antenna

They are usually a phased array of patches. Many such antennas today have the patches fed through slots excited by a trace extending beyond the slot. This is a multilayer board, but it separates the transmission line layer from the radiating layer so both can be independently optimized.
 

Re: toll road RFID antenna

can i have the dimensions of this whole thing??
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top