Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronic Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

tlp250 driver interface with IRFZ44N showing input current is outside specified range

Status
Not open for further replies.

nur.aiub

Newbie level 3
Joined
Sep 3, 2014
Messages
3
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
17
in my inverter ckt i m getting input current is outside specified range error.here i used tlp250&IRFZ44N t2.jpg
 

Ivan-Holm

Member level 5
Joined
Jun 3, 2010
Messages
84
Helped
3
Reputation
6
Reaction score
2
Trophy points
1,288
Location
Denmark
Activity points
1,894
It will help if you paste your schematic from were this error or warning comes from :)
 

nur.aiub

Newbie level 3
Joined
Sep 3, 2014
Messages
3
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
17
1.jpg
this is my schematic please help me how can i solve this problem..
 

biswaIITH

Full Member level 3
Joined
Aug 23, 2014
Messages
178
Helped
24
Reputation
48
Reaction score
21
Trophy points
18
Location
Hyderabad
Activity points
1,388
the output current limit from the TLP250 to is (1.5A)..May be that limit is being violated.. U hav not used any resistance before the gate..Try putting some current limitting resistance(15-20ohm) between the output of TLP250 and the gate of the switches...
 

Status
Not open for further replies.
Toggle Sidebar

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top