gdtron
Newbie level 3
Hi all, I`m working on a project using LPC2368 and CrossStudio Release 1.6 Build 2. The project is simple. A function is executed at regular intervals. These intervals is done by interrupt. I'm using Timer0 and Match0 register to make the interrupt. The problem is that when I start program in free running (debuging mode using JTAG) the interrupt is not executed. When I put break point in the interrupt function during program working in free running, execution stop at the break point and after that the function is executed and the interrupt starts to work. But it happens only when i put a break point or pause running program and start again. Has anybody faced with a such problem?
Thank you in advance!
Thank you in advance!
Last edited: