Hyper_Tech
Newbie
I have an issue with the +5 V output on the following PSU.
Thermaltake Toughpower 750 AP
Testing the PSU with a tester, the PSU starts normally with all voltages showing!
The +5 V outut shows to 5.1 Volts, but a few seconds later (about 2~3) it changes to 4.1 Volts and remains stable.
Has anyone any idea?
I tried to find the schematic or a service manual), with no luck!
Thank you for your attention
Thermaltake Toughpower 750 AP
Model: PSH-750V
REV: B
P/N: W0116
Testing the PSU with a tester, the PSU starts normally with all voltages showing!The +5 V outut shows to 5.1 Volts, but a few seconds later (about 2~3) it changes to 4.1 Volts and remains stable.
Has anyone any idea?
I tried to find the schematic or a service manual), with no luck!
Thank you for your attention
Last edited: