hello,everyone
i am modeling a delta sigma modulator with simulink.i want to calculate the snr of the modulator.the tool i used is sdtoolbox.but i have a question about the snrcalculation given by the sdtoolbox.the method it provide is the following:
1 extract the signal from the output data of the modulator
2 subtract the signal got from the 1st step from the output samples,the difference is the noise
3 calculate the power of signal and of the signal,then do division
what i dont understand is how to get the formula of the 1st step as the picture below shows,could anyone help me please?
Hello
no need to do any kind of manual calculation. in your simulator calculator use the function of FFT with high resolution setup and under long period. the result will be the power distribution in the frequency domain, now use the function of SNR also from your simulator calculator and you will get the result