Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

technology file attachment problem in cadence

Status
Not open for further replies.
T

tanzil_dhk

Advanced Member level 4
Full Member level 1
Joined
Aug 9, 2006
Messages
109
Helped
4
Reputation
8
Reaction score
0
Trophy points
1,296
Visit site
Activity points
1,924
hi, i just changed into IC613 from IC5141.I am using NCSU development kit. When i was trying to add instances (pmos,pjfet ) to schematic from NCSU Analog Parts i can find Model Name = pmos and the attributes are blank even though i attached NCSU_Techlib_ami06.no matter which component i am chpoosing it seems not attached to any tech file. I again tried to attach and cmd reads :

ddGetObjLib: Was passed an Invalid Id (0x1789e918).
INFO (TECH-180011): Design library 'my_design' successfully attached to technology library 'NCSU_TechLib_ami06'.

Please tell me what is going wrong??

Thanks
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top