Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

TDS210 Communication module upgrade

Status
Not open for further replies.

jgorsk

Member level 3
Joined
Dec 31, 1999
Messages
54
Helped
10
Reputation
20
Reaction score
10
Trophy points
1,288
Activity points
352
tds2mm

Upgrade from TDS2CM to TDS2MM is possible.
All you have to do is:
1. replace 32kx8 RAM memory with 128k x 8/SO32/70ns/5V
2. Replace EPROM memory with 27C040 (512k x 8/PLCC32/70ns/5V)
programmed with "tds2mm.hex"

It works fine after the upgrade.
 

picman2

Member level 2
Joined
May 18, 2001
Messages
51
Helped
2
Reputation
4
Reaction score
0
Trophy points
1,286
Activity points
363
tds2cm

Hello
I have a TDS 210 equipped with TDS2MM.

Are you aware of firmware upgrades (and how to do it) ?
My scope has the following version number
TDS210 = v 1.19
TDSMM = v 1.04

TIA

PicMan
 

jgorsk

Member level 3
Joined
Dec 31, 1999
Messages
54
Helped
10
Reputation
20
Reaction score
10
Trophy points
1,288
Activity points
352
tds210 communication

Communication module's firware can be upgraded only
by replacing OTP EPROM. I don't know how to
upgrade scope's firmware.
 

Sobakava

Full Member level 6
Joined
Mar 27, 2002
Messages
350
Helped
8
Reputation
16
Reaction score
8
Trophy points
1,298
Activity points
3,346
tds2mm.hex

where can I find latest firmware for TD*S2CM?
jgorsk, could you pm me?
 

Sobakava

Full Member level 6
Joined
Mar 27, 2002
Messages
350
Helped
8
Reputation
16
Reaction score
8
Trophy points
1,298
Activity points
3,346
tds210

My TDS210 has firmware 1.06, is it possible to update it? How?
What are the enhancements in newer versions?

Regards
 

jgorsk

Member level 3
Joined
Dec 31, 1999
Messages
54
Helped
10
Reputation
20
Reaction score
10
Trophy points
1,288
Activity points
352
tds210 module

It's possible to upgrade the firmware. There are two types of TDS210.
Old TDS210 with PLCC EPROM memory in socket.
New with soldered FLASH memory.

TDS210 with firmware 1.06 is the old one,
so you have to replace the EPROM memoory
 

wollerie

Newbie level 1
Joined
Mar 24, 2010
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
germany
Activity points
1,283
Hallo,

can anybody sen me the tds2mm.hex file??

thanks
 

rho-bot

Advanced Member level 4
Joined
Jan 11, 2009
Messages
105
Helped
16
Reputation
32
Reaction score
16
Trophy points
1,298
Activity points
1,947
Check PM...

Regards
rho-bot
 

thinkker

Newbie level 1
Joined
Jan 10, 2011
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,284
Re: tds2mm

Upgrade from TDS2CM to TDS2MM is possible.
All you have to do is:
1. replace 32kx8 RAM memory with 128k x 8/SO32/70ns/5V
2. Replace EPROM memory with 27C040 (512k x 8/PLCC32/70ns/5V)
programmed with "tds2mm.hex"

It works fine after the upgrade.

Can you send me "tds2mm.hex"?thank you very much.
 

Taipei sam

Newbie level 1
Joined
Apr 9, 2011
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,283
Could I have "tds2mm.hex" ? thank you very much too. ;-)
 

pawelkos

Newbie level 1
Joined
Apr 12, 2011
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
Brighton
Activity points
1,284
I have TDS210 v 1.06 and CMV 1.02, can someone send me please tds2mm.hex?
 

mmaher

Newbie level 1
Joined
Jul 16, 2011
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
Wolverhampton
Activity points
1,285
Hi, I would like to try this upgrade to my TDS2CM (V1.04) module, fitted to a TDS220 (V1.16). Has anyone had a problem doing the upgrade? I hope one of you guys can help me find the TDS2MM.HEX software...:?:
 

danny_tt

Newbie level 3
Joined
Aug 15, 2011
Messages
3
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,294
Anyone can share the TDS2MM.hex. i would like try upgrade my TDS2CM.....
 

pandomaci1

Newbie level 1
Joined
Jan 18, 2012
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,284
Hi all,

please, can anyone send me the "tds2mm.hex" file. Thank you very much
 

Gaston Pazo

Newbie level 1
Joined
Aug 2, 2013
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
3
Hi,

Where can i get the tds2mm.hex file?

Thanks.
 

pw777

Newbie level 1
Joined
Mar 26, 2011
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,284
Hi,
I am also looking for the tds2mm.hex file. I would appreciate it if someone could send it to me.
Thanks
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top