Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Switched capacitor filter question

Status
Not open for further replies.
J

jmarkwolf

Junior Member level 3
Junior Member level 3
Joined
Feb 13, 2007
Messages
29
Helped
1
Reputation
2
Reaction score
0
Trophy points
1,281
Activity points
1,503
The Texas Instrument TLC04 data sheet is a little ambiguous. It suggests several circuits relating to CMOS vs TTL clocks, single vs bi-polar supply, etc. etc.

With a TTL clock, a signal source having a 5V DC bias, and AGND biased to mid-supply, the datasheet suggests that a 10V power supply be used.

My requirements are a little different.

My signal source has a 2.5V DC bias. Can a 5V power supply work without issue here?
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top