Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
You can go through the routing guidelines in the data sheet of the IC you had mentioned earlier,also google with proper string,you might get tons of it.
Make sure that the diode is as close to the IC as you can get, that it's return path is straight back to the IC, the inductor next, as close as possible.
Then the cap needs to be close & take the output from the cap pads not from any trace from the inductor that leads upto the cap.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.
