Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Suggest me a chip for using RFID to 13,56 MHz

Status
Not open for further replies.

superroberto

Junior Member level 1
Joined
Dec 30, 2002
Messages
15
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
ITALY -TORINO-
Activity points
19
I would have to use a RFID to 13,56Mhz someone knows to advise to me of the chip economic
 

tms3705a

Hi. Of course the cost of the chips (if that is what you mean) are highly influanced by the volumes. I would suggest that you also look at modules, especially if you are early in your design. Two good sources are www.sonmicro.com for modules and www.3alogics.com for a inexpensive 13.56MHz chip.

There are of course many others and you can look up their prices in Digikey:

For example:

TI S6700
TI TRF7960 and TRF7961 (13.56MHz)
Atmel U2270B (U2280??) - Atmel has the u3280/u9280, but sells it in large quantities
Cypress CY8C0104/05 chip/module
MFRC500 from Philips
SLF9000 from Infineon
tms3705a from ti
HTRC1100 1T Philips
HT079231 NXP Hitag
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top