Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Squared track on a circumference of circle in Altium

Status
Not open for further replies.

daniel488

Newbie level 5
Joined
Jan 16, 2010
Messages
9
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,283
Location
Poland
Activity points
1,351
Hi,

how to draw such a track like here, around the stator of bldc motor:

inside-of-a-brushless-dc-motor-1-1024x539[1].jpg

Daniel
 
Last edited by a moderator:

marce

Advanced Member level 5
Joined
Feb 23, 2010
Messages
2,015
Helped
623
Reputation
1,246
Reaction score
608
Trophy points
1,393
Location
UNITED KINGDOM
Activity points
13,954
Draw as a DXF in a mechanical program and import the DXF to create a copper shape... example attached just change example.dxf lines are separate and may need changing to a closed polyline shape.
 

Attachments

  • example.txt
    16.8 KB · Views: 3

ArticCynda

Advanced Member level 1
Joined
May 8, 2013
Messages
424
Helped
82
Reputation
164
Reaction score
81
Trophy points
1,308
Activity points
4,047
I agree with marce, importing it would be the easiest way to do it, though using a polar grid and a lot of patience it's also possible to draw it directly in Altium.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top