Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

spectrum of rectangle

Status
Not open for further replies.

harry456

Member level 1
Joined
Nov 13, 2012
Messages
39
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
1,545
What is the formula of the spectrum of a rectangular signal, it should be some sort of sinc-function but according to my formula book it's something like u(t)=AT*sinc(piTf), but what's the formula that describes the signal that can be measured i.e. the ons-sided voltage spectrum? thx
 

I am not sure I get your question:
If you have a rectangular signal, the sinc function is the spectrum of the signal (you just need to take the positive frequencies and double the amplitude for the one-sided spectrum).
If your rectangle is a filter (like a sample and hold circuit), your input signal spectrum must be multiplied by the sinc spectrum to get the output voltage spectrum.
 

Harry,

Do you mean a square wave signal?

Does 'the ons-sided voltage spectrum' mean a voltage that swings from, say, 0V to 5V?
 

It's a rectangular wave with û=1V according to my maths formulary collection the ampl is A*T*si(pi*f*tau) but it's not possible to measure so. like [Volt*second]
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top