Feb 21, 2010 #1 U uncond1t1on4l Newbie level 2 Joined Feb 21, 2010 Messages 2 Helped 0 Reputation 0 Reaction score 0 Trophy points 1,281 Activity points 1,294 I am working on an assignment and I don't know how to debounce the push buttons and switches for the Spartan-3E board. I know I have to add some time-delay to get ride of the bounce, but I dont know how to do that in assembly language. =[
I am working on an assignment and I don't know how to debounce the push buttons and switches for the Spartan-3E board. I know I have to add some time-delay to get ride of the bounce, but I dont know how to do that in assembly language. =[
Feb 21, 2010 #2 K karesz Advanced Member level 5 Joined Apr 13, 2008 Messages 2,328 Helped 327 Reputation 654 Reaction score 52 Trophy points 1,328 Location EU Activity points 14,592 Hi, the best methode is, I think, pro button/switch an RS-FF to have, but minimum some gates w. Schmitt-input... K. Added after 3 minutes: w*w.ikalogic.com/debouncing.php
Hi, the best methode is, I think, pro button/switch an RS-FF to have, but minimum some gates w. Schmitt-input... K. Added after 3 minutes: w*w.ikalogic.com/debouncing.php
Feb 23, 2010 #3 S siongboon Advanced Member level 1 Joined Jan 24, 2006 Messages 423 Helped 45 Reputation 88 Reaction score 10 Trophy points 1,298 Location Singapore Activity points 4,075 Hi, I think you can try writing the software to handle the deboucing. Unless you need the switch to be very fast. Software solution save spave and cost. from: Siong Boon MODERATOR - SIGNATURE LINKS ARE NOT ALLOWED
Hi, I think you can try writing the software to handle the deboucing. Unless you need the switch to be very fast. Software solution save spave and cost. from: Siong Boon MODERATOR - SIGNATURE LINKS ARE NOT ALLOWED