Dummyeng
Member level 4
i design an amplifier but its give me some error and warnings like
First this warning happen and i dont know why
Warning detected by hpeesofsim in Substrate model during netlist flattening.
Simulations referencing substrate `MSub1' will not include metal loss
because metal thickness is zero.
i think i give correct number
and second problem is that ads reject some number
Fwd sourceLevel=807.661e-03 80.77% 2/2 Step=121.9047619 rejected
Fwd sourceLevel=682.979e-03 68.30% 2/2 Step=58.04988662 rejected
and in the end it happnd
and
First this warning happen and i dont know why
Warning detected by hpeesofsim in Substrate model during netlist flattening.
Simulations referencing substrate `MSub1' will not include metal loss
because metal thickness is zero.
i think i give correct number
and second problem is that ads reject some number
Fwd sourceLevel=807.661e-03 80.77% 2/2 Step=121.9047619 rejected
Fwd sourceLevel=682.979e-03 68.30% 2/2 Step=58.04988662 rejected
and in the end it happnd
and