Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Solar/wind hybrid battery charger

Status
Not open for further replies.
I

immikhan25

Newbie level 4
Joined
Jul 24, 2009
Messages
6
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
karachi,pakistan
Activity points
1,321
Solar/wind hybrid

i am using wind mil of 24V 60A DC output and 24V 8A solar DC output.i need to charge the 24V 200Ah battery bank with these two power sources.how can i charge batteries with both of them at the same time?
 

Re: Solar/wind hybrid

Hi,
I think that you have a two basic ways for connection.
First way is by paralelling of the two energy sources, after their serial bloking diodes (with commong ground connection), and after then you should connect a single battery charger (DC-DC converter), between energy sources and battery.
Second way is by using a two separate dc-dc converters (chargers), for each energy source, with paralelled output on the battery side.
Best regards,
Taner
:D
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top