Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronic Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Software hang detection

Status
Not open for further replies.

saurav_sdpl

Full Member level 3
Joined
Sep 29, 2006
Messages
189
Helped
4
Reputation
8
Reaction score
2
Trophy points
1,298
Activity points
2,568
I have designed a product which is both battery powered and adaptor powered .

Adaptor 5V/500mA and 2.4V NIMH battery.

When i am using with Adaptor system running OK , but when i power it with battery it goes into software hang state always /

I could under stand the problem.

After battery i am using bosster L6920 which gives 3.3V
RESET IC is TPS3823, where could be the problem and possible solution

Urgent
 

hamed_sotoudi

Full Member level 3
Joined
Aug 1, 2007
Messages
158
Helped
15
Reputation
30
Reaction score
4
Trophy points
1,298
Location
Germany Hamburg
Activity points
2,207
what is your product? I mean which microcontroller u used in your product? check your current when you are using battery. and check your circuit where u connect battery to it.
 

Status
Not open for further replies.
Toggle Sidebar

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top