Can I increase the step of voltage level ? for example 100v.
I set duty cycle to maximum possible value and get n1,n2,B(max),... for 2000v.
so I can reduce duty cycle to decrease output voltage.
is this affect Transformer properties and take it to saturation mode??
Hi,
2000v is a long distance from 300v. In single step, it is very difficult and uneconomic. In multi stage it can be done, but the process will be very lengthy. Thanks.
can you please guide me to make SMPS of 440V and 5A with complete circuitry and parts that are readily avail....such that I can vary the coltage from 0V to 440V and current from 1A to 5A...
the first problem are the 2KV ..u need 2000V input Voltage..if u only for example
use 5V output 0,25% duty cycle..this an nail of impuls (25ns @100khz)..not possilbe do like this..
if u want fix this problem..u do like this... your input Voltage must be floating with the output voltage..mean 1000V output ur inputvoltage about 1200V...
the first step not use uC make it analog..after gone well u can use and uC