Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronic Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Smartmedia source code - c code

Status
Not open for further replies.
M

mrlogical

Guest
I have an ST10 project that requires a smartmedia card for data storage, this must be compatible with windows storage fat16/32.

The data I store on the card must be readable by PC. does anyone have the 'C' code for such a project.

Thanks in advance
 

layoutdude

Junior Member level 3
Joined
Feb 21, 2002
Messages
27
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
208
I don't have any code, but I can upload the various specs if you are interested.

The ones I have are:

Electrical Specifications (300k)
Logical Format Specifications (180k)
Physical Format Specifications (230k)
Physical Format Specifications (230k)
 

vsop

Member level 2
Joined
Aug 24, 2001
Messages
52
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,288
Location
east
Activity points
513
Maybe you should contact your local Toshiba sale office at first, they provide some reference code for their customers which purchase Smart Meda (NAND chip) cards. Otherwise try contact SSFDC forum, there are also some reference codes delivered as software IP.
 

maziar

Full Member level 4
Joined
Jun 6, 2001
Messages
195
Helped
5
Reputation
10
Reaction score
1
Trophy points
1,298
Location
Islamic republic of Iran
Activity points
1,566
hi all


tanx fot this topic.i have same problem itry write with mcu(8051) in smartmedia with "Standard pc file format" for example text and read by PC can help me for this topic
 

carllucas

Junior Member level 1
Joined
Jul 12, 2002
Messages
15
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
62
Hi,
I have in use a library from Samsung - also for a ST10. You can get it for free - ask them for a Reference C Source Code.
Goto h**p://w*w.sec.samsung.com/semiconductors/flash/design_guide/quick_design_tip/quick_design_tip.htm - there you will find informations about SmartMedia and their email address.

carllucas
 

btbass

Advanced Member level 5
Joined
Jul 20, 2001
Messages
1,897
Helped
438
Reputation
880
Reaction score
287
Trophy points
1,363
Location
Oberon
Activity points
12,861
If you go to the FTDI website, find with Google, they have an application note for a USB to Smart card reader, you can download the code for a Scenic micro or a Pic Chip. Maybe you could port the code?
Good luck!!!
:?:
 

Thomson

Full Member level 3
Joined
Oct 15, 2004
Messages
181
Helped
4
Reputation
8
Reaction score
1
Trophy points
1,298
Activity points
2,400
btbass said:
If you go to the FTDI website, find with Google, they have an application note for a USB to Smart card reader, you can download the code for a Scenic micro or a Pic Chip. Maybe you could port the code?
Good luck!!!
:?:
Hi,
I'm currently writing the firmware for the USB Card Reader used for SM/xD media cards; however the Logical/Physical Address Translation Table cost me too much RAM space. One bad news is that i found that the other chip designs all utilize a very small RAM space. Therefore it's very crucial for me to figure out how this is realized.

Could you please specify the detailed web link or could you tell me how to realize the translation table implementation! for example, how to implement the 1GB xD reader firmware.

Thanks in advance,

Thomson
 

Status
Not open for further replies.
Toggle Sidebar

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top